PN 9001024
Rev. B Jan. 2000
SECTION 2 – Configuration
Page 2-8
SATO CL608 & CL612 SERVICE MANUAL
External Signal Type Selection (DSW3-6, DSW3-7
)
Selects the type of output signal.
Refer to Section 3.7 for a description of the available external signal types.
Repeat Print via External Signal (DSW3-8)
Allows an external device to control the reprint of the label in the print buffer.
12 345678
ON
OFF
DSW3
12 345678
ON
OFF
DSW3
DSW3-8 SETTING
OFF Disabled
ON Enabled
DSW3-6 DSW3-7 SETTING
Off Off Type 4
Off On Type 3
On Off Type 2
On On Type 1
Note: The DIP Switch functions listed incorporate the latest
firmware revisions at the time of printing.
To Next Page
Loading...
