Every person working at the Fitness Sorter; SB-3000 must have previously read and understand
the user manual and, specially the safety information. The Fitness Sorter; SB-3000 may only be
operated by authorized personnel and may be serviced by trained and authorized personnel.
Safety Information
Always be careful when using the machine. To reduce the risk of fire, electrical shocks,
and other injuries, keep these safety considerations in mind when installing, using, and
maintaining your machine:
Stability
Place the machine on a secure, stable surface. The machine can be seriously damaged
if it falls.
Power Supply
Provide correct power to the machine, as listed on the back of the machine. If you are
not sure of the type of power that is supplied to your office, call your electric company.
Grounding
If the plug has three prongs, it must be plugged into a grounded (three hole) outlet.
Grounded plugs and outlets are designed for your safety - do not try to make a three-
prong plug fit into a two-prong outlet by modifying the plug or outlet in any way. If you
cannot insert the plug into your wall outlet easily, then a qualified electrician should
inspect the outlet.
Overload
Do not plug too many electrical devices into a wall outlet or an extension cord. An
overloaded outlet could be a reason of a fire and electrical shock hazard.
Cleaning
Before cleaning the machine, unplug it from the power outlet. Clean exposed parts with
a soft cloth slightly dampened with water. Do not use aerosol cleaners.
Gas Leaks
Never use any machine close to a gas leak. If you think gas is leaking, call the gas
company immediately. A small electrical spark in the machine could cause a fire or
explosion.
To Next Page
Loading...