14.0.0. Maintenances
14.1.0. Sensor cleaning
SB-3000 is built in various sensors to detect the malfunction of the machine the status of the notes in the
machine and to recognize the denominations of the notes. The sensors are very delicate and if they are
not cleaned correctly everyday, this may take negative effect on the performance of the machine as well
as cause the machine to malfunction
Clean the sensors as described below everyday after working.
[WARNING]
TURN THE POWER OFF AND UNPLUG THE POWER CORD BEFOR CLEANING.
DO NOT USE A VOLATILE SOLVENT FOR CLEANING.
To Next Page
Loading...