5.1.7 Reject Reasons
No. Display on Screen Meaning
1 NO I.D The machine failed to identify the denomination.
NO I.D．１ Ｏｕｔ ｏｆ ｈｅｉｇｈｔ
NO I.D．２ Ｏｕｔ ｏｆ ｗｉｄｔｈ
NO I.D．３ Ｏｕｔ ｏｆ Ｓｋｅｗ
NO I.D．４ Ｃａｎ＇ｔ ｆｉｎｄ ｔｏｐ ｅｄｇｅ
NO I.D．５ Ｃａｎ＇ｔ ｆｉｎｄ ｓｉｄｅ ｅｄｇｅ
NO I.D．６ Ｃａｎ＇ｔ ｆｉｎｄ ｂｏｔｔｏｍ ｅｄｇｅ
NO I.D．７ Ｌｏｎｇ ｄｉｓｔａｎｃｅ （ＳＶＭ）
NO I.D．８ Ｌｏｎｇ ｄｉｓｔａｎｃｅ （Ｔｅｍｐｌａｔｅ）
NO I.D．９ Ｗｈｉｔｅ ｎｏｔｅ
NO I.D．１０ Ｌａｓｔ ｎｏｉｄ
NO I.D．１１ ＯＣＲ ｅｒｒｏｒ
NO I.D．１３ Ａｓｙｍｍｅｔｒｉｃａｌ Ｅｒｒｏｒ
2 No READ The note was not successfully read
3 OVER RUN The next note was fed too close to the first one.
4 SUSPECT (CF)
The note was suspected to be counterfeit by UV,MR
and IR sensors
5 STAY NOTE The note was not fit to the condition of sorting
6 DOUBLE More than two pieces of notes were fed into machine.
7 CHAIN Chain Error
8 HALF Half Error
9 Over count
The note was in machine after completing the count fit
to the condition of sorting.
(Caution)
If the reject reason is double or chain, the number of the reject note displayed on LCD can be
different with the actual number of notes in the reject pocket.
To Next Page
Loading...