SBM SB-3000 - Page 60

60
■ BATCH Function
Batch is used when user want to count specific number of banknotes. For example, Batch is used when
user want to count 50pcs of banknotes while Stacker pocket capacity is set to 100pcs.
When BATCH Function is on, operation is stopped after counting the number user set in advance even if
banknotes still remain on Hopper. Batch size cannot exceed Stacker pocket’s maximum size.
● How to set
[1] Set Batch screen is generated by touching Batch button on the display of each mode.
[2] Can set on Set Batch screen (FIG -41).
Batch off: Do not use Batch function. ①
Stacker 1 and Stacker 2 Count Set: Set Batch numbe② r for Stacker 1 and Stacker 2 respectively.
(FIG 5-41)
(FIG 5-01)
(FIG 5-42)