SBM SB-3000 - Page 7

7
Recommended Tools
Picture Name and Spec.
Picture Name and Spec.
L Wrench
Ø1.5
Hexagonal
Screwdriver
5mm
L Wrench
Ø2
Screwdriver(-)
2.5mm
Spanner
7mm
Screwdriver(+)
Ø6
Long-Nose
Multi-Meter
Nipper
Dust Blower
Aerosol
Anti-Static
Gloves
Rubber Coated
Dust Air Blower
 Dust Blower: Dust may cause to make a short in PCB so periodically clear dust apt to be
accumulated inside of machine.
 Anti-Static Gloves: In maintenance or repairing, recommended to put it on to protect static
caused to make a short.