SCHIEBEL AB Series User Manual

16 Original Declaration of Incorporation of Partly Completed Machinery
Operating instructions for actuators type AB with SMARTCON control unit
OM-ENGLISH-CSC-V2.08-2019.11.07
SEC-EINBAUERKLAERUNG-ENGLISH-V2.01-2018.04.24
16 Original Declaration of Incorporation of Partly Completed Machin-
ery
According Machinery Directive 2006/42/EC, (Annex II, sub. B)
The maufacturer, the company:
SCHIEBEL Antriebstechnik Gesellschaft m.b.H.
Josef-Benc-Gasse 4
A-1230 Vienna
hereby declares that the partly completed machinery described below:
Electric actuators series:
AB rAB exAB exrAB
with optional additional components:
Smartcon CSC Smartcon exCSC
the following basic requirements of the Machinery Directive (2006/42/EC) are applied and fulfilled:
Annex I, articles
1.1.2, 1.1.3, 1.1.5; 1.2.1, 1.2.1, 1.2.2, 1.2.6; 1.3.1, 1.3.2, 1.3.7;
1.5.1; 1.6.3; 1.7.1, 1.7.3, 1.7.4
The following European harmonized standards have been applied:
EN12100:2010
EN ISO 5210:1996 EN ISO 5211:2001 DIN 3358:1982
The relevant technical documentation for partly completed machinery referred to in Annex VII, Part B has
been prepared. The manufactor commits to submitting the documents for the incomplete machine the compe-
tent national authority electronically upon request.
For the preparation of the technical documents is authorized:
Head of mechanical Engineering
Schiebel Antriebstechnik Gesellschaft m.b.H.
Josef-Benc-Gasse 4
A-1230 Vienna
This partly completed machinery must not be put into service until the final machinery into which it is to
be incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC,
where appropriate.
The electric actuators as partly completed machinery is in conformity with the relevant regulations of the EU
directives:
Directive 2014/30/EU ("’EMV-Directive"’)
Directive 2014/35/EU ("’Low voltage directive"’)
Directive 2014/34/EU ("’ATEX-Directive"’) for correspondingly marked devices
The corresponding separate EC Declarations of Conformity are valid.
Vienna,
(location)
den 14.12.2016
(date)
.........................................................................
(Klaus Schiebel, general manager)
50

SCHIEBEL AB Series Specifications

General

Brand	SCHIEBEL
Model	AB Series
Category	Controller
Language	English