SCHUNK PGL-plus-P - Variant IOL; No Communication with the Product (LED Is Flashing or Does Not Light Up); Faults that Are Displayed Via LED Status

Troubleshooting
44 02.00 | PGL-plus-P | Assembly- and Operating Manual | en | 1508050
6.6 Variant IOL
6.6.1 No communication with the product (LED is flashing or does not
light up)
Possible cause Corrective action
No voltage supply Check the voltage supply and apply voltage
if necessary.
Check that the plug connection is connected
properly and check the pin allocation.
No IO-Link connection Check cables and connections for function
and ensure compatibility of the IO-Link
master.
6.6.2 Faults that are displayed via LED status
Possible cause Corrective action
No voltage supply Check device status via IO-Link.
Take measures according to error message.
Acknowledge error. See Software Manual
"PGL-plus-P with Integrated Sensor System,
IO-Link Protocol".