SCHUNK PGL-plus-P - Lubricants;Lubrication Points (Basic Lubrication)

Maintenance
7.3 Lubricants/Lubrication points (basic lubrication)
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point Lubricant
Metallic sliding surfaces Rivolta F.L.G. GT-2 *
All seals Rivolta F.L.G. GT-2 *
Cylinder surfaces Rivolta F.L.G. GT-2 *
Serration Rivolta F.L.G. GT-2 *
* The product contains food-compliant lubricants as standard.
The requirements of standard EN1672-2:2020 are not fully
met.
NOTE
• Change contaminated food-compliant lubricant.
• Observe information in the safety data sheet from the lubricant
manufacturer.
4702.00 | PGL-plus-P | Assembly- and Operating Manual | en | 1508050