Annex to Declaration of Incorporation
11 Annex to Declaration of Incorporation
in accordance with 2006/42/EC, Appendix II, no. 1 B
as well as
in accordance with the Supply of Machinery (Safety) Regulations 2008.
1. Description of the basic safety and health protection requirements, as per 2006/42/EC,
Annex I and per the Supply of Machinery (Safety) Regulations 2008, that apply to and are
fulfilled for the scope of the incomplete machine:
Product designation 2-Finger Parallel Gripper
Type designation PGL-plus-P
To be provided by the System Integrator for the overall machine ⇓
Fulfilled for the scope of the partly completed machine ⇓
Not relevant ⇓
1.1 Essential Requirements
1.1.1 Definitions X
1.1.2 Principles of safety integration X
1.1.3 Materials and products X
1.1.4 Lighting X
1.1.5 Design of machinery to facilitate its handling X
1.1.6 Ergonomics X
1.1.7 Operating positions X
1.1.8 Seating X
1.2 Control Systems
1.2.1 Safety and reliability of control systems X
1.2.2 Control devices X
1.2.3 Starting X
1.2.4 Stopping X
1.2.4.1 Normal stop X
1.2.4.2 Operational stop X
1.2.4.3 Emergency stop X
1.2.4.4 Assembly of machinery X
1.2.5 Selection of control or operating modes X
1.2.6 Failure of the power supply X
1.3 Protection against mechanical hazards
1.3.1 Risk of loss of stability X
1.3.2 Risk of break-up during operation X
1.3.3 Risks due to falling or ejected objects X
1.3.4 Risks due to surfaces, edges or angles X
6302.00 | PGL-plus-P | Assembly- and Operating Manual | en | 1508050
To Next Page
Loading...
