SCHUNK PGL-plus-P - Symbol Definition; Applicable Documents; Sizes; Variants

General
6 02.00 | PGL-plus-P | Assembly- and Operating Manual | en | 1508050
1.1.3 Symbol definition
The following symbols are used in this manual:
■ Prerequisite for an action
1. Action 1
2. Action 2
✓ Intermediate results
✔ Final results
}1.1.3 [
/
6]: chapter number and [page number] in hyperlinks
1.1.4 Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
• For variant with integrated sensor system (IOL): Software
Manual "PGL-plus-P with Integrated Sensor System, IO-Link
Protocol"*
The documents labeled with an asterisk (*) can be downloaded
from schunk.com.
1.1.5 Sizes
This operating manual applies to the following sizes:
• PGL-plus-P 10
• PGL-plus-P 13
• PGL-plus-P 16
• PGL-plus-P 20
• PGL-plus-P 25
1.1.6 Variants
This operating manual applies to the following variations:
• PGL-plus-P
• PGL-plus-P with gripping force maintenance "O.D. gripping" (AS)
• PGL-plus-P with gripping force maintenance "I.D. gripping" (IS)
• PGL-plus-P high-temperature (V)
• PGL-plus-P precision (P)
• PGL-plus-P with integrated sensor system (IOL)
NOTE
Variants with safe, certified gripping force maintenance (ASC and
ISC) are described in a separate manual. This can be downloaded
from schunk.com.