Page 19
STAT
IM
2000/2000S Service Guide
96-106775 Rev 5.0
2. Tools, Maintenance Schedules, Procedures and Testing
STATIM 5000/5000S/5000 G4 Service Guide
Figure 6
Combined Temperature and Pressure Meter
• Heise PTE-1 Handheld LCD digital calibrator complete with temperature and pressure
modules, and PT100 probe as follows:
Meter (without data logging capabilities) — PTEC = X X 4 4A
Pressure Module — HQS2 B A A 400 kPa A
Temperature Module — HQS RT1 PT-100
RTD Probe Pt-100 — PT5
Notes:
• These product references are very specific, and the local supplier of Heise equipment
(see www.heise.com) should be consulted prior to confirming order codes.
• The meter above is of the non data logging variety. If data logging is required, please
consult order code variations from Heise data sheet.
• The above probe is 3.2mm (1/8in) diameter.
To Next Page
Loading...
