PRE-RIDE INSPECTION
ITEM OPERATION
✓
Ski/wakeboard post
(WAKE Pro model)
Inspect and check operation.
Engine START/STOP button Check operation.
Engine cut-off switch
Check operation.
Hull
Inspect hull for cracks and other dam-
ages.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow of
water and damage the propulsion unit.
Clean as necessary. If any obstruction
cannot be removed, refer to an autho-
rized Sea-Doo dealer for servicing.
F18J04Y
21
TYPICAL — INSPECT THESE AREAS
1. Water intake
2. Ride plate
Drain Plugs
Secure bilge drain plugs.
smo2009-002-135_a
TYPICAL - BILGE DRAIN PLUG LOCATIONS
1. Bilge drain plugs
2. Tighten
3. Untighten
WARNING
Ensure bilge drain plugs are prop-
erly secured prior to launching the
watercraft in water.
Fuel Tank
Fill the fuel tank.
WARNING
Strictly adhere to instructions de-
tailed in
FUELING PROCEDURE
.
Engine Compartment
Inspect the engine compartment for
fuel vapor odor.
WARNING
Should any leak or gasoline odor
be present, do not apply electrical
power or start the engine. Refer to
an authorized Sea-Doo dealer be-
fore use.
To access the engine compartment,
open the seat.
________
SAFETY INF
ORMATION
________
43
To Next Page
Loading...
Need help?
General