MULTIFUNCTION GAUGE
l/h
smo2010-002-110
FUEL CONSUMPTION DISPLAY MODE -
INSTANT FUEL FLOW
3. Press the SET button to save the
setting and return to the main dis-
play.
NOTE: The fuel consumption value
will be displayed in the numerical dis-
play. Double click the SET button to
reset the average fuel consumption in-
dication. The display will momentarily
indicate zero (0).
VTS Mode
TheVTSMODEfunctionisusedto
manually set the VTS or change VTS
PRESET settings. Refer to
OPERAT-
ING INSTRUCTIONS
subsection for
details.
Driving
The DRIVING function can be used
for activating or deactivating SPORT
mode. Refer to
OPERATING MODES
for details.
Display
The DISPLAY function is used to
change the indication in the numerical
display. Refer to
CHANGING NUMER-
ICAL DISPLAY INDICATION
.
Fault Codes
The FAULT CODES function is used
to display active fault codes. Refer t
o
MONITORING SYSTEM
subsection.
Key Mode
The KEY MODE function is used for
changing LEARNING or RENTAL
key settings. Refer to
OPERATING
MODES
subsection for details.
Settings
The SETTINGS function is used for:
– Clock setting. Refer to
MULTI-
FUNCTION GAUGE SETUP
– Dock mode setting. Refer to iS (IN-
TELLIGENT SUSPENSION) in the
SUSPENSIONS
subsection
– iBR override function for mainte-
nance.
Changing Numerical
Display Indication
To change the indication in the numeri-
cal display, carry out the following:
1. Press the MODE button on the RH
handlebar repeatedly until DISPLAY
is visible in the multifunction display.
smo2009-002-114_p
FUNCTION SELECTED - DISPLAY
2. Press the SET button to enter the
DISPLAY function.
3. Press the UP or DOWN arrow but-
ton until the preferred indication
appears.
–RPM
– SPEED
– LAKE TEMPERATURE
–DEPTH
– ENGINETEMP(RXT-X)
_______________
67