MULTIFUNCTION GAUGE
lap
2
1
smo2010-002-114_a
1. Lap time, second lap
2. Lap count 2
To view each lap time, use the UP or
DOWN arrow button. The lap counter
will indicate which lap is indicated.
To view the cumulative lap time of all
laps recorded, use the UP or DOWN
arrow button until ALL is visible in the
lap counter.
lap
2
1
smo2010-002-115_a
1. Total lap time for 2 laps
2. Lap count, ALL laps
To reset the lap timer and lap counter,
press and hold the SET button until the
timer and counter are reset to 0 (zero).
Ski Mode
Ski mode is used for repeated con-
trolled launches when towing a skier
or wakeboarder. Refer to
OPERAT
ING
MODES
for more details.
Fuel Consumption
The FUEL CONSUMPTION function
is used to display the watercrafts fuel
consumption in four different ways.
– Instant fuel flow per hour (gal/h or
l/h)
– Average fuel flow per hour (gal/h or
l/h)
– Distancetoempty(MiorKm)
– Timetoempty(hormin).
The fuel consumption functions are
not continuously active.
A fuel consumption function becomes
active only when selected as the indi-
cation in the numerical display.
When the LOW FUEL indications
come on in the multifunction gauge,
the "TIME TO EMPTY" and "DISTANCE
TO EMPTY" functions will indicate "0"
(zero) if they are the selected indica-
tion.
To display the watercraft fuel con-
sumption, carry out the following:
1. Press the MODE button repeatedly
until FUEL CONSUMPTION is visi-
ble in the multifunction display.
smo2010-002-109
FUNCTION SELECTED - FUEL
CONSUMPTION
2. Press the UP or DOWN arrow but-
tontotoggletothedesiredfue
lcon-
sumption display mode.
66
______________
To Next Page
Loading...
Need help?
General