Mirra Manual for Windows Release 2.2 80
Step 4: If your folder was password protected, enter your Access Password in the
Password Required window and click OK.
Step 5: Select a location for the folder in the Browse for Folder window and click OK.
The folder is restored at the selected location.
Step 6: Repeat Steps 3 through 5 until all your folders have been restore on your
new computer.
Step 7: Select the restored folders for backup (see
Selecting Folders for Backup
).
Step 8: Once you confirm that each folder has been completely restored and
backed up, delete the static copy from the Mirra to avoid confusion and
redundancy.
Stopping a Restore
To stop restoring a folder,
Step 1: On the Backup & Restore screen, select the folder being restored.
Step 2: On the Restore Tasks menu, click Stop Restoring.
Saving a Folder
To save a folder,
Step 1: On the Backup & Restore screen, select the folder to be saved.
Step 2: On the Restore Tasks menu, click Save as.
To Next Page
Loading...
