Mirra Manual for Windows Release 2.2 7
Chapter 3: Setting Up your Mirra
Installing the Mirra Software
You must install the Mirra software on each Windows XP or 2000 PC, Windows
2000 Server, Windows 2003 Server, or Windows Vista in your network that you
want to connect to your Personal Server.
If You’re Updating from 2.0 to 2.2
If you’re updating your Mirra software from Version 2.0 to Version 2.2, you must
exit the Mirra software on your desktop before you begin the update process. (This
does not apply to an upgrade from Version 2.1 to Version 2.2.)
To exit the Mirra software,
Step 1: Rght-click the Mirra icon in the System Tray.
Step 2: On the dropdown menu, select Exit.
The software closes on your desktop and the Mirra icon disappears from
your System Tray.
To Next Page
Loading...
