| 3 - User manual
Note that only the word clock on the word clock input can be forwarded via the
word clock output. The internal word clock is not forwarded via the word clock
output.
Word clock with digital audio
If multiple devices with digital audio signals are connected in a production environment,
their clock signals must be synchronized via a word clock, otherwise audio errors occur. The
word clock of one device becomes the master. All of the other devices become slaves and
synchronize with the master.
Dante®
The Audinate Brooklyn III Dante® interface installed in the Base Station should be understood
as a standalone digital audio device with its own word clock and also has to be clocked either
internally or externally.
You require the Dante Controller software from Audinate for these settings. You
can access it using the link: Dante Controller.
Defining the master and slave
The Base Station word clock input, the Base Station internal word clock, the word clock
of the Audinate Brooklyn III Dante® interface, or the Dante® network can be defined as the
master.
For LinkDesk see: Configuring interface settings.
For WebUI see: Audio Interfaces.
41
To Next Page
Loading...
