4.2. USING L-BAND PPP CORRECTION DATA WITH THE ASTERX-U
Step 6: Verifying the configuration
With a valid TERRRASTAR or VERIPOS subscription, the AsteRx-U will be able to decode PPP
correction data. The Access line in the L-band decoder Information field should show
Access Enabled as in Figure 4-22.
After a few moments, the AsteRx-U positioning mode should change to PPP as indicated by
the highlighted icon in the upper status field.
Figure 4-22: L-Band decoder Information field showing that TerraStar decoding is
enabled
46
To Next Page
Loading...
