SEW-Eurodrive DFE32B PROFINET IO User Manual

10
Manual – DFE32B Fieldbus Interface PROFINET IO
3
Content of this manual
Introduction
3 Introduction
3.1 Content of this manual
This user manual illustrates:
• The Installation of the DFE32B PROFINET IO option card in the MOVIDRIVE
®
MDX61B inverter.
• The use of the DFE32B PROFINET IO option card in the MOVITRAC
®
B inverter and
in the UOH11B gateway housing
• The startup of MOVIDRIVE
®
B in the PROFINET fieldbus system.
• The start up of MOVITRAC
®
B connected to the PROFINET gateway.
• The configuration of PROFINET via GSD files
• The operation of MOVITOOLS
®
MotionStudio via PROFINET.
• Diagnostics via integrated web server
3.2 Additional documentation
For information on how to connect MOVIDRIVE
®
/MOVITRAC
®
B easily and effectively
to the PROFINET IO fieldbus system, you should request the following additional
publications about fieldbus technology:
•MOVIDRIVE
®
fieldbus unit profile manual
•MOVITRAC
®
B/MOVIDRIVE
®
B system manual
Apart from describing the fieldbus parameters and the corresponding coding, the
MOVIDRIVE
®
fieldbus unit profile manual and the MOVITRAC
®
B system manual
provide examples to illustrate various control concepts and possible applications.
The MOVIDRIVE
®
fieldbus unit profile manual provides a list of all the drive inverter
parameters that can be read and written via the different communication interfaces such
as system bus, RS485 and via the field bus interface.
3.3 Characteristics
With the DFE32B PROFINET IO option and their powerful universal fieldbus interface,
the MOVIDRIVE
®
MDX61B drive inverter and the MOVITRAC
®
B frequency inverter
allow for a connection to higher-level automation systems via PROFINET IO.
3.3.1 MOVIDRIVE
®
B, MOVITRAC
®
B and PROFINET
The behavior of the inverter which forms the basis of PROFINET operation, the so-
called unit profile, is independent of any particular fieldbus and is therefore a uniform
feature. This allows the user to develop fieldbus-independent drive applications. This
makes it much easier to change to other bus systems, such as DeviceNet (option DFD).

SEW-Eurodrive DFE32B PROFINET IO Specifications

General

Model	DFE32B
Input Voltage	24 V DC
Protection Class	IP20
Weight	Approx. 0.2 kg
Communication Protocol	PROFINET
Relative Humidity	95% (non-condensing)