SEW-Eurodrive DFE32B PROFINET IO - Configuring the Serial Communication

104
Manual – DFE32B Fieldbus Interface PROFINET IO
9
Serial (RS-485) communication via interface adapter
MOVITOOLS® MotionStudio – Operation
9.7.3 Configuring the serial communication
You must have a serial connection between your PC and the units you want to configure.
You can establish one, for example, using the USB11A interface adapter.
Proceed as follows to configure serial communication:
1. Click on "Configure communication plugs" [1] in the toolbar.
This will open the "Configure communication plugs" window.
68062AXX
[1] "Configure communication plugs" symbol
12188AEN
[1] "Type of communication" dropdown menu
[2] "Activate" checkbox
[3] [Edit] button
[1]