8
Manual – DFE32B Fieldbus Interface PROFINET IO
2
Other applicable documentation
Safety Notes
2 Safety Notes
2.1 Other applicable documentation
• Installation and startup only by trained personnel observing the relevant accident
prevention regulations and the following documents:
– "MOVIDRIVE
®
MDX60B/61B" operating instructions
– "MOVITRAC
®
B" operating instructions
• Read through this manual carefully before you commence installation and startup of
the DFE32B option.
• You must adhere to the information in the documentation as a prerequisite to fault-
free operation and fulfillment of warranty claims.
2.2 General safety notes for bus systems
This communication system allows you to match the MOVIDRIVE
®
inverter to the
specifics of your application. As with all bus systems, there is a danger of invisible,
external (as far as the inverter is concerned) modifications to the parameters which give
rise to changes in the unit behavior. This may result in unexpected (not uncontrolled)
system behavior.
2.3 Safety functions
MOVIDRIVE
®
MDX60B/61B and MOVITRAC
®
B inverters may not perform any safety
functions without higher-level safety systems. Use higher-level safety systems to ensure
protection of equipment and personnel.
For safety applications, refer to the information in the following publications.
• Safe disconnection for MOVIDRIVE
®
/MOVITRAC
®
B
Use only those components in safety applications that were explicitly designed and
delivered for this purpose by SEW-EURODRIVE.
2.4 Hoist applications
MOVIDRIVE
®
MDX60B/61B and the MOVITRAC
®
B are not designed for use as a
safety device in hoist applications..
Use monitoring systems or mechanical protection devices as safety equipment to avoid
possible damage to property or injury to people.
2.5 Product names and trademarks
The brands and product names contained within this manual are trademarks or
registered trademarks of the titleholders.
To Next Page
Loading...
Need help?
General
