SEW-Eurodrive DFE32B PROFINET IO - Project Planning with PROFINET; Project Planning for PROFINET IO Controller

28
Manual – DFE32B Fieldbus Interface PROFINET IO
5
Project planning for the PROFINET IO controller
Project Planning with PROFINET
5 Project Planning with PROFINET
This Chapter describes the project planning for the MOVIDRIVE
®
B and MOVITRAC
®
B/gateway inverters with the DFE32B option. The following GSD file is used for the
project planning of the DFE32B with MOVIDRIVE
®
B or in MOVITRAC
®
B:
GSDML-V2.1-SEW-DFE-DFS-2Ports-jjjjmmtt.xml
This GSD file contains the unit description for the operation of the DFE32B in
MOVIDRIVE
®
B or as fieldbus gateway for MOVITRAC
®
B.
5.1 Project planning for the PROFINET IO controller
This chapter describes the project planning for MOVIDRIVE
®
B or MOVITRAC
®
B with
PROFINET using the current GSD(ML) file. The project planning is described using the
example of the SIMATIC Manager project planning software with a SIMATIC CPU 315F
2 PN/DP.
Installing the
GSD file
• Start STEP 7 HWKONFIG and select the [Install new GSD file] menu item in the [Ex-
tras] menu.
• Select the file "GSDML-V2.1-SEW-DFE-DFS-2Ports-YYYYMMDD.xml" on the "Soft-
ware ROM 7" CD in the following dialog. "JJJJMMTT" [YYYYMMDD] represents the
date of the file. You can navigate to the required directory via [Browse]. Confirm your
selection by clicking [OK].
• The SEW PROFINET IO DFE32B connection can be found under [Additional Field
Devices] / [Drives] / [SEW] / [DFE/DFS(2Ports)].
INFORMATION
The latest GSD file version is also available for download on the SEW website
(www.sew-eurodrive.de) in the Software section.