SEW-Eurodrive DFE32B PROFINET IO - Connection and Terminal Description DFE32 B Option

Manual – DFE32B Fieldbus Interface PROFINET IO
19
4
Connection and terminal description DFE32B option
Assembly and Installation Notes
4.4 Connection and terminal description DFE32B option
Part number DFE32B PROFINET IO fieldbus interface option: 1821 345 6
INFORMATION
• The DFE32B PROFINET IO fieldbus interface is only possible in conjunction with
MOVIDRIVE
®
MDX61B, not with MDX60B.
• Plug the DFE32B option into the fieldbus slot.
Front view of
DFE32B
Description DIP switch Function
61630AXX
LED RUN (red/yel-
low/green)
LED BUS FAULT (red/yel-
low/green)
Shows the current status of the DFE32B.
Shows the status of the PROFINET IO connection.
X30: Ethernet connection
LED Link (green)
LED Activity (yellow)
X32: Ethernet connection
LED Link (green)
LED Activity (yellow)
DIP switch AS
DEF IP
Auto-setup for gateway operation
Resets the address parameters to the following default values:
• IP address: 192.168.10.4
• Subnet mask: 255.255.255.0
• Gateway: 1.0.0.0
• PROFINET device name: PNETDeviceName_MACID
Front view of
MOVITRAC
®
B,
DFE32B and UOH11B
Description Function
58129axx
LED H1 (red)
LED H2 (green)
X24 X terminal
System error (only for gateway functionality)
Reserved
RS485 interface for diagnostics via PC and MOVITOOLS
®
MotionStudio (only for MOVITRAC
®
B)
DFE 32B
X30X32
Def IP
PROFINET IO
AS
RUN
BUS
FAULT
01
X24
H1
H2