SEW-Eurodrive DFE32B PROFINET IO - MOVITRAC B (Gateway) - Control

58
Manual – DFE32B Fieldbus Interface PROFINET IO
6
MOVITRAC® B (gateway) – control
Operating Behavior in Conjunction with PROFINET
6.5 MOVITRAC
®
B (gateway) – control
The inverter is controlled via the process data channel, which is up to 3 I/O words in
length. These process data words may be mapped in the I/O or peripheral area of the
controller if a programmable controller is used as IO controller and can be addressed as
usual.
PO = process output data / PI = process input data
58612AXX
Figure 3: Mapping PROFINET data in the PLC address range
[1] Address range MOVITRAC
®
B, unit 2
[2] Address range MOVITRAC
®
B, unit 1
PIW308
PIW310
PIW312
PI 3
PO 3
PI 1
PO 1
PI 2
PO 2
PI 2
PO 2
PI 1
PO 1
PI 3
PO 3
POW308
POW310
POW312
[1]
PO 3
PO 2
PO 1
POW314
POW316
POW318
PI 1
PO 1
PI 2
PO 2
PI 3
PO 3
PIW314
PIW316
PIW318
PI 3
PI 2
PI 1
MOVITRAC
®
B 1 MOVITRAC
®
B 2
[2]
00
I