SEW-Eurodrive DFE32B PROFINET IO - Starting the Software and Creating the Project

Manual – DFE32B Fieldbus Interface PROFINET IO
97
9
First steps
MOVITOOLS® MotionStudio – Operation
9.2 First steps
9.3 Starting the software and creating the project
Proceed as follows to start MOVITOOLS
®
MotionStudio and create a project:
1. Start the MOVITOOLS
®
MotionStudio from the Windows start menu via:
[Start] / [Program Files] / [SEW] / [MOVITOOLS MotionStudio] / [MOVITOOLS
MotionStudio]
2. Create a project with a name and directory.
9.4 Establishing communication and scanning the network
Proceed as follows to establish a communication with MOVITOOLS
®
MotionStudio and
scan your network:
1. Set up a communication channel to communicate with your units.
For detailed information on how to configure a communication channel, see the sec-
tion regarding the relevant communication type.
2. Scan your network (unit scan). Press the [Start network scan] button [1] in the tool-
bar.
64334AXX