Manual – DFE32B Fieldbus Interface PROFINET IO
105
9
Serial (RS-485) communication via interface adapter
MOVITOOLS® MotionStudio – Operation
2. From the list [1], select "Serial" as the communication type.
In the example, "Serial" is activated as the communication type for the first commu-
nication channel [2].
3. Press the [Edit] button [3] on the right side of the "Configure communication plugs"
window.
This will display the settings for the "serial" communication type.
4. It might be necessary to change the preset communication parameters on the tab
pages [Basic settings] and [Advanced settings]. Refer to the detailed description of
the communication parameters.
12189AEN
To Next Page
Loading...
