SEW-Eurodrive DFE32B PROFINET IO - Page 108

108
Manual – DFE32B Fieldbus Interface PROFINET IO
9
Communication SBus (CAN) via interface adapter
MOVITOOLS® MotionStudio – Operation
Connecting the
USB-CAN inter-
face to the unit
The figure shows how the USB-CAN interface adapter [2] from SEW is connected with
the unit [4] and the PC [1] via the SBus interface [3], in this example the unit is a
MOVIDRIVE
®
.
INFORMATION
Faulty data transmission
• Use only shielded cables suitable (approved) for CAN networks.
68061AXX
[1] PC
[2] USB-CAN interface with prefabricated connection cable with terminating resistor (included in the scope
of delivery)
[3] SBus interface of the unit (terminal X30 on DFC11B)
[4] Unit (MOVIDRIVE
®
with connection option DFC11B in this example)
[1]
[3]
[2]
[4]