Manual – DFE32B Fieldbus Interface PROFINET IO
111
9
Communication SBus (CAN) via interface adapter
MOVITOOLS® MotionStudio – Operation
2. From the list [1], select "SBus" as the communication type.
In the example, "SBus" is activated as the communication type for the first commu-
nication channel [2].
3. Press the [Edit] button [3] on the right side of the "Configure communication plugs"
window.
This will display the settings for the "SBus" communication type.
4. It might be necessary to change the preset communication parameters on the tab
pages [Basic settings] and [Advanced settings]. When doing so, refer to the detailed
description of the communication parameters.
12192AEN
To Next Page
Loading...
