38
Manual – DFE32B Fieldbus Interface PROFINET IO
5
Project planning for the PROFINET IO controller
Project Planning with PROFINET
• The inverters connected to the gateway are represented in PROFINET as of slot 2.
Delete the entries for the respective slots depending on the number of connected in-
verters (e.g. slot 2 to slot 7 for a configuration of 5 inverters).
• Move the entry AS 1 Drive (1x3PD) to the free slots via drag & drop.
• Specify the IO and periphery addresses for the configured drives and save your con-
figuration.
The slot model is used for project planning with PROFINET. Each slot is assigned to
a DFE32B fieldbus interface. The following segmentation is used for the gateway
function of the DFE32B.
Slot 1 is not currently not used. Slots 2 ... 9 are assigned process data channels for
connected devices and 3 process data per drive.
• Extend your user program by data exchange with the new units.
• Process data transfer is consistent. SFC14 and SFC15 can be used to transfer pro-
cess data.
12190AEN
To Next Page
Loading...
