SEW-Eurodrive DFE32B PROFINET IO - Page 40

40
Manual – DFE32B Fieldbus Interface PROFINET IO
5
Project planning for the PROFINET IO controller
Project Planning with PROFINET
• Click [Ethernet] [4] in the "Node/PK-IO System" section to enter the IP address as-
signed before (→ following figure).
• On the "IO Cycle" tab [2], you can specify an update time for the node to update its
process data. The DFE32B option in MOVITRAC
®
B supports a minimum update
time of 4 ms (→ following figure).
11732AEN
11733AEN