36
Operating Instructions – MOVIFIT® basic
6
Requirements
Startup
6.2 Requirements
The following conditions apply to startup:
• The MOVIFIT
®
basic unit must be installed correctly both mechanically and electri-
cally.
• Appropriate safety measures prevent the drives from starting up unintentionally.
• Appropriate safety measures must be taken to prevent risk of injury or damage to the
machine.
The following hardware must be available for startup and parameterization of the
MOVIFIT
®
basic inverter:
• Operator terminal LT-BG, see chapter "Connecting the operator terminals LT-BG
and MB-LC"
• or PC/laptop, see chapter "PC connection"
The following software must be available on the PC or laptop for startup and parameter-
ization of the MOVIFIT
®
basic inverter:
• LT Shell", version 3.20 or later
INFORMATION
For startup of the MOVIFIT
®
basic motor starter, you do not require a PC/laptop and
software.
To Next Page
Loading...
