SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - Page 117

Index
IT system.............................................................. 47
L
Line contactor, see contactor............................... 48
M
Memory card
Replacing units ............................................... 93
Micro DLC ............................................................ 26
Minimum clearance.............................................. 32
Installation, horizontal ..................................... 33
Installation, vertical ......................................... 32
Minimum distances .............................................. 32
Mobile application ................................................ 43
Motor terminal assignment................................... 61
Motor with brake
Connection...................................................... 59
Mounting brackets
Use.................................................................. 34
Mounting position................................................. 31
MOVIDRIVE
®
, see Inverter .................................. 24
MOVITRANS
®
PE connection................................................. 43
Protective measures against electrical hazards
........................................................................ 42
see also THM pick-up ..................................... 56
THM pick-up.................................................... 55
TPM30 mobile converter................................. 28
N
Nameplate............................................................ 17
Function modules nameplate.......................... 18
Nomenclature....................................................... 14
Notes
Designation in the documentation..................... 6
Meaning of the hazard symbols ........................ 6
O
Operating modes.................................................. 89
Operation
Brake control................................................... 90
Operating modes ............................................ 89
Safety notes .................................................... 12
Output, see DC 24 V output................................. 66
Outputs for BST control........................................ 87
P
Parameter module, see ID module ...................... 79
Parameterization.................................................. 86
PE connection................................................ 42, 43
Power input, see AC 400 V input ......................... 57
Power supply, see AC 400 V input....................... 57
Processing unit..................................................... 26
Product names....................................................... 8
Protective grounding ............................................ 42
Pulse-code measurement .................................... 47
R
Radio modem
Terminating resistor ............................ 75, 78, 79
Rapid stop............................................................ 94
RCD, see Residual current device....................... 47
Repairs................................................................. 92
Replacing units..................................................... 92
Representation
Connections .................................................... 53
Reset.................................................................... 95
Residual current device........................................ 47
Rights to claim under limited warranty ................... 7
RS485 interface
Connection................................................ 69, 70
S
-S1 operating switch............................................. 24
Safe brake control SBC........................................ 29
Safe disconnection............................................... 12
Safety concepts.................................................... 29
Safety functions.............................................. 10, 29
Safety functions, see functional safety technology
........................................................................ 29
Safety notes
Designation in the documentation..................... 6
General ............................................................. 9
Installation....................................................... 11
Meaning of the hazard symbols ........................ 6
Preliminary information ..................................... 9
Structure of embedded ..................................... 7
Structure of section-related............................... 6
Safety relay
Connection...................................................... 82
Safety technology
Detailed information ........................................ 29
20278543/EN – 09/14
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
117