Doc# E166703 8-12
8: Using Ethernet Communication
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Enter Key: (The maximum length of the passphrase is 63 characters. EIG rec-
ommends using a passphrase of 20 characters or more for maximum security.)
Encryption: 0=TKIP, 1=TKIP+WEP <0> ? Set the type to the minimum
required security level. The “+” sign indicates that the group (broadcast)
encryption method is different from the pairwise (unicast) encryption (WEP
and TKIP).
TX Data rate: 0=fixed, 1=auto fallback <1>? 1
TX Data rate: 0=1, 1=2, 2=5.5, 3=11, 4=18, 5=24, 6=36, 7=54 Mbps <7>?
Enter data transmission rate, e.g., 7 for 54Mbps.
Minimum Tx Data rate: 0=1, 1=2, 2=5.5, 3=11, 4=18, 5=24, 6=36,
7=54 Mbps <0>? 0
Enable Power management <N>? Y
Enable Soft AP Roaming <N>? N
Max Failed Packets (6-64, 255=disable) <6>? 6
• If you select “3” (WPA2/802.11i), you will make the following settings:
Change Key <N> Y
Display Key <N> N
Key Type 0=hex, 1=passphrase <0> 1
Enter Key: (The maximum length of the passphrase is 63 characters. EIG rec-
ommends using a passphrase of 20 characters or more for maximum security.)
Encryption: 0=CCMP, 1=CCMP+TKIP, 2=CCMP+WEP, 3=TKIP, 4=TKIP+WEP
<3>? (Set the type to the minimum required security level. The “+” sign indi-
cates that the group (broadcast) encryption method is different from the pair-
To Next Page
Loading...
Need help?
General
