APRS® connector
You can use this connector to connect to the APRS® network. The easiest way
is to use the Quick setup to set up the connection.
This connector can stay active in the background if the Enable in background
checkbox is checked, which means you can use the openSPOT4 the same way
as before with another active connector, but it will function also as an APRS®
client.
The openSPOT4 will automatically receive APRS® chat messages and if
enabled, it can transmit the device location or position information received
from D-STAR® and C4FM/Fusion® radios. If the APRS® connector is enabled
then you can see its connection status on the Status page.
To Next Page
Loading...
