Need help?Do you have a question about the SharkRF openSPOT2 and is the answer not in the manual?
Instructions on how to connect the USB-C cable to power the openSPOT2.
Steps to connect the device to a Wi-Fi network for initial setup.
Describes the process of initializing the openSPOT2 via its web interface.
Guides through the initial configuration for connecting to a transceiver and network.
Configuration steps for using a DMR radio with the openSPOT2.
Configuration steps for using a D-STAR radio with the openSPOT2.
Configuration steps for using a C4FM/Fusion radio with the openSPOT2.
Configuration steps for using an NXDN radio with the openSPOT2.
Configuration steps for using a P25 radio with the openSPOT2.
Configuration steps for setting up a POCSAG pager with the openSPOT2.
Provides example channel configurations for DMR radios like Hytera and Motorola.
Explains how talkgroups work in DMR networks and their linking methods.
Details on dynamically linking talkgroups for communication.
Information on configuring static talkgroups via the BrandMeister Network.
Steps to set up the APRS special connector for location forwarding.
Guide on configuring a D-STAR transceiver for APRS data.
Instructions to enable the GPS receiver for location services.
Advanced options for customizing APRS symbol, SSID, and comment.
How to get a list of available servers via the radio's interface.
Method to search for specific servers using the radio.
Connecting to servers directly using their ID.
Saving favorite servers into categories for easy access.
Steps to configure the APRS connector for location forwarding.
Guide on configuring a C4FM/Fusion transceiver for APRS data.
Instructions to enable the GPS receiver for location data.
Advanced options for APRS symbol, SSID, and comment customization.
Displays a log of all incoming and outgoing calls and announcements.
Shows the device's internal log messages, available in advanced mode.
Explains the dejitter queue and how to adjust its length for optimal audio.
General information about connector settings, keepalive, and timeouts.
Basic settings for all connectors, including null connector behavior.
Settings for modem frequency, transmit power, and RX offset.
Configuration for transmitting a CW identifier.
Advanced modem parameters like call hang time, BCLO, and ignore RX.
Manages multiple configuration profiles for different settings and modes.
Options for upgrading the device's firmware and data.
Information about logging into the SharkRF Network.
Settings for enabling and customizing voice announcements.
Configure location data for APRS network reporting.
Specific settings for DMR mode, including color code and cross mode behavior.
Specific settings for D-STAR mode, including echo callsign.
Specific settings for C4FM/Fusion mode, including data calls and Wires-X options.
Specific settings for NXDN mode, including RAN and cross mode behavior.
Specific settings for P25 mode, including NAC and cross mode behavior.
Configuration for POCSAG mode, including frequency and bitrate.
Allows locking the device to specific IDs or callsigns.
Options for rebooting, resetting configurations, and LED brightness.
Displays current Wi-Fi and internet connection status.
Shows real-time network traffic data for the device.
Configuration for hostname, Wi-Fi password, and network country.
Settings for synchronizing device time using the Network Time Protocol.
Configuration of Wi-Fi network connections, including multiple profiles.
Configuration of IP address and DNS settings (DHCP or static).
Options for cloning MAC addresses, useful for captive portals.
Feature for making quick calls to link/unlink talkgroups and reflectors.
Tool to manage talkgroups and reflectors on the BrandMeister network.
Allows sending and receiving SMS messages in DMR mode.
Interface for managing POCSAG messages and DAPNET connections.
Enables sending and receiving messages over the APRS network.
Tool to look up radio IDs and callsigns.
Interface for checking and applying firmware and data upgrades.
Using the connector for cross-mode communications (C4FM, NXDN).
Automatically connecting to a specific ID or talkgroup upon server connection.
Enabling rerouting of calls to specific talkgroups like TG9.
Using SSIDs to connect multiple hotspots to the same network.
Using the DMRplus dongle for cross-mode communications.
Switching reflectors/gateways using URCALL or specific callsigns.
Using DTMF codes to switch between servers and modules.
Switching reflectors/gateways using URCALL or specific callsigns.
Using DTMF codes to switch between servers and modules.
Using the FCS connector for cross-mode communications.
How to change YSFReflector servers via the radio's interface.
Using the YSFReflector connector for cross-mode communications.
Managing talkgroups for NXDNReflector servers.
Changing servers via the radio's interface.
Using the NXDNReflector connector for cross-mode communications.
Managing talkgroups for P25Reflector servers.
Changing servers via the radio's interface.
Using the P25Reflector connector for cross-mode communications.
Tests audio quality by recording and playing back transmissions.
Checks the currently active configuration profile number.
Switches between different configuration profiles using radio commands.
Queries the status of the currently active connector.
Retrieves the device's active IP address via radio commands.
Command to unlink from D-STAR networks and activate the Null connector.
How to use DMR connector with C4FM radio for cross-mode communication.
How to use DMR connector with NXDN radio for cross-mode communication.
How to use C4FM connector with DMR radio for cross-mode communication.
How to use C4FM connector with NXDN radio for cross-mode communication.
How to use C4FM connector with P25 radio for cross-mode communication.
To Next Page
General
