SharkRF openSPOT2 - FCS Connector; Cross Mode Usage

FCSconnector
YoucanusethisconnectortoconnecttoanetworkwhichsupportstheFCSprotocolliketheFCSnetwork.
TheeasiestwayistousetheQuicksetuptoconnecttothesenetworks.
YoucanchangeroomswithyourC4FMradiobyenteringtheSpecialcommand/crossmodeprivatecallDTMF
codeDTMFcode(bydefaultit's*)followedbythedesiredroomnumber(forexample *99forroom99).Youcan
switchFCSserversifyouuse3digits.Example:entering *303willswitchtoFCS003room03.
YoucanalsousetheWires-XbuttonmenuofyourC4FMradiotoselect/searchforservers.
Crossmodeusage
TheFCSconnectorisaC4FMconnector,butitsupportsDMR,NXDNandP25crossmodemmodes.
Youcanchangeroomsbystartingaprivatecalltothedesiredroomnumber.YoucanswitchFCSserversifyou
use3digits.Example:startingaprivatecalltoID303willswitchtoFCS003room03.
FCS
79