SharkRF openSPOT2 - Settings Page; Configuration Profile

Settingspage
YoucanchangethegeneralsettingsoftheopenSPOT2onthispage.
Configurationprofile
Youcanuse5differentconfigurationprofileslots.Youcanswitchbetweenthemonthewebinterface,orby
usingyourradio(seetheControlcallssectionformoreinformation).
Youcanrenameprofiles,copyonetoanotherslotorexport/importto/fromafile.
BysettingtheChangeafterlastcallsettingtonon-zero(thissettingisavailableifAdvancedmodeisenabled),
theopenSPOT2willswitchtothespecifiedprofileslotafteratimeoutsincethelastcallwasreceived.
TheDon'tshowinitsetuponlogincheckboxischeckediftheInitializationsetuphasbeencompleted.
Notesonconfigurationprofiles
Pleasekeepinmindthatallconfigurationprofilesareemptybydefault,soifyouswitchtoapreviously
Settingspage
47