SharkRF openSPOT2 - DMRplus Dongle Connector; Cross Mode Usage

DMRplusdongleconnector
YoucanusethisconnectortoconnecttoanetworkwhichsupportstheDMRplusdongleprotocollikeDMRplus,
Phoenix,DMR-MARC,XLX.
TheeasiestwayistousetheQuicksetuptoconnecttothesenetworks.
YoucanchangetheusedreflectorIDbystartingashortprivatecallonyourradiotothedesiredreflectorID
(between4000and5000).
Crossmodeusage
TheDMRplusdongleconnectorisaDMRconnector,butitsupportsC4FMandNXDNcrossmodemmodes.Ifyou
useaC4FMradio,makesureitisindigitalnarrow(DN)mode,otherwiseyourcallscan'tbeconvertedandonly
silencewillbesenttothenetwork.
IfyouareusingaC4FMradio,youcanswitchreflectorsfromyourradiobyenteringCrossmodegroupcallDTMF
code(bydefaultit's*)followedbythereflectorIDinDTMFcode,orusetheWires-Xbuttonmenuto
select/searchforservers.
Example:toswitchtoreflector4770,enterDTMFcode *4770.
DMRplusdongle
74