SharkRF openSPOT2 - Homebrew;MMDVM Connector; Cross Mode Usage

Homebrew/MMDVMconnector
YoucanusethisconnectortoconnecttoanetworkwhichsupportstheHomebrewortheMMDVMprotocol,like
BrandMeister,DMRplus,Phoenix,DMR-MARC,XLX.
TheeasiestwayistousetheQuicksetuptoconnecttothesenetworks.
Thisconnectorsupports2protocols:HomebrewandMMDVM.UsetheHomebrewprotocoltoconnectto
BrandMeisternetworkservers,andtheMMDVMprotocoltoconnecttoDMRplus,Phoenix,DMR-MARCorXLX
servers.
ThedefaultserverpasswordforBrandMeisterserversispassw0rdorpassword,butsomeserversdonotusethese
defaults.InthiscasetakealookattheBrandMeisterwiki,orasktheserver'sadminforthepasswordifthe
openSPOT2won'tconnectwiththedefaultone.
Ifyoucan'tconnecttoaBrandMeisterserverbecausetheauthenticationhasfailed,thenturnoffHotspot
SecurityonyourBrandMeisterSelfCarepage,orusethehotspotpasswordyou'vesetthereastheserver
password.
IfyouareusingaBrandMeisterserverinHomebrewprotocolmode,youcanseethelistofcurrentlylinkedstatic,
dynamictalkgroupsandreflectorsontheopenSPOT2'sStatuspage.
Crossmodeusage
TheHomebrew/MMDVMconnectorisaDMRconnector,butitsupportsC4FMandNXDNcrossmodemmodes.
Incrossmodemmodes,youcansettheRoutecrossmodecallstoIDtothetalkgroupIDyouwanttotalkto(set
thecalltypetoGroupcall).IfyouuseacrossmodemmodewhichisID-based(likeNXDN),thenthisID(andcall
type)willbeautomaticallyupdatedbasedonwhatIDyoucallonyourradio.ThisIDwillbeautomaticallyusedif
youcalltheID0,oracallsign-basedmodemmodeisused(likeC4FM).
Homebrew/MMDVM
71