SharkRF openSPOT2 - BrandMeister Manager

ThequickcallfeatureisavailablewhentheHomebrew/MMDVMconnectorisactive.
Reflectorandtalkgrouplinking(andunlinking)isdonebythenetwork,nottheopenSPOT2.TheopenSPOT2
hastomakequickcalls,whicharethesameaspressingPTTforashorttimeonaradio(kerchunking).These
emptycallswillalsoshowupontheBrandMeisterNetwork'sdashboard.
Quickcallisusefulforlinking/unlinkingtalkgroupsandreflectors.StartingashortprivatecalltoareflectorID
(between4000and5000)willlinkthereflector.StartingashortgroupcalltoatalkgroupIDwilllinkthatTG.
OntheBrandMeisternetwork,reflectorsareunlinkedbystartingaprivatecalltoID4000,andbothreflectors
andtalkgroupsareunlinkedbystartingagroupcalltoID4000.
QuickcallshortcutscanbestoredintheopenSPOT2'scurrentconfigurationprofile.Ifyouhoverthemousecursor
overasavedtalkgroup'sbutton,orthebuttonispressedforafewsecondsthenthe(BrandMeister)talkgroup's
namewillappear.
IftheAutogroupcall4000beforeshortcutcallcheckboxischecked,thentheopenSPOT2willautomatically
startaquickcalltoTG4000tounlinkeverythingbeforequickcallingthedesiredID.
BrandMeisterManager
Sidepanels/Toolspage
62