SharkRF openSPOT2 - Powersaving

Powersaving
Ifpowersavingisenabled,andit'sactive,theopenSPOT2consumesmuchlesspower.Powersavingisactiveif
thestandbyLEDsequenceisblinkinginamuchlowerinterval.TheopenSPOT2canonlyenterpowersavingstate
ifthewebinterfaceisnotopenandtherearenoongoingcalls.
EnablingpowersavingreducestheLED'sbrightness,turnsofftheUSBserialconsolefeature,andputstheWi-Fi
interfaceintopowersavemode.Thebuilt-inLLMNRandMDNSserversmaynotfunctionproperlyinthismode,
soopeningthewebinterfacebyenteringtheopenSPOT2'shostnameintothebrowser(example:
http://openspot2.local)maynotworkreliably.UseSharkRFLinktoopenthewebinterface.
Powersaving
91