SharkRF openSPOT2 - Status Page; Call Log; Log

Statuspage
YoucanseeinformationabouttheopenSPOT2'scurrentstatusonthispage.
Calllog
Thecalllogdisplaysallcallscomingfromthenetwork,fromthemodem,orfromtheopenSPOT2itself(voice
announcements).InmodeswhereIDsareusedasdestinationandsourceIDs(ex.DMR,NXDN)theIDsare
matchedtotheIDdatabaseandreplacedwithcallsigns.YoucangetmoreinformationaboutanIDorcallsignif
youhoverthemouseoverit.
Eachcalllogentryhasinformationaboutthecallatthetoprightcorneroftheentrybubble.BERisdisplayedin
percentaftertheletterB,packetloss(incaseofnetworkcalls)isdisplayedinpercentaftertheletterL.Thecall
durationisalsodisplayedafteracallends.
YoucanexportallcalllogentriesinCSVformatbyclickingontheExportcalllogbutton.
IftheLimitcallloglinesischecked(it'scheckedbydefault)thenonlyalimitednumberofcalllogentriesare
allowedtobeinthecalllog.ThisisgoodforlimitingthewebbrowserCPU/memoryuse.
Log
ThedevicelogisonlyshownifAdvancedmodeisenabled.
Statuspage
39