SharkRF openSPOT2 - SharkRF IP Connector Client Connector

SharkRFIPConnectorClientconnector
YoucanusethisconnectortodirectlyconnecttoanotheropenSPOT,openSPOT2,oranetworkwhichsupports
theSharkRFIPConnectorprotocol,orouropensourceSharkRFIPConnectorProtocolServer.Theprotocol's
documentationcanbefoundonGitHub,soyoucanalsodevelopyourownapplicationfortheopenSPOT2.
TheeasiestwayistousetheQuicksetuptoconnecttoaSharkRFIPConnectorserver.
IfyouwanttoconnectdirectlytoanotheropenSPOToropenSPOT2,makesurethattheanotherdeviceissetup
astheserver,andtheUDPportusedbythisconnector(bydefaultit's65100)iscorrectlysetupontheserver's
router(it'sopenonthefirewallandisforwardedtotheserveropenSPOT/openSPOT2onit'slocalnetwork).
Allmodemmodesaresupportedbythisconnector,withautomaticcrossmodeconversionbetweenthefollowing
modes:
DMR,C4FM(DNmode)andNXDN.
C4FM(VWmode)andP25.
SharkRFIPConnectorClient
88