EasyManua.ls Logo

SharkRF openSPOT2 - Firmware Upgrade; SharkRF Network; Voice Announcements

SharkRF openSPOT2
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
unusedprofile,theopenSPOT2willstartinWi-FiAPmodeastherewillbenoconfiguredWi-Finetworks
toconnect.
TheopenSPOT2rebootsonprofileswitch.
Wi-Finetworksandpasswordsarestoredforeachprofileseparately.
Thewebinterfacepasswordisstoredforeachprofileseparately.
Firmwareupgrade
TheopenSPOT2willautomaticallycheckforfirmwareanddataupgradesperiodically,asspecifiedbytheCheck
intervalsetting(onlyavailableifAdvancedmodeisenabled).IfAutomaticupgradesettingsarecheckedthen
theopenSPOT2willautomaticallydownloadupgrades.
Dataupgradesareappliedimmediately,butupgradingthefirmwarerequiresareboottothebootloader.Ifanew
firmwarehasbeendownloaded,arebootwillbeautomaticallyscheduledforthe(local)timesetbytheAuto
upgradeatsetting.Bydefaultit'ssetto4amnextday.Therebootwillonlybeperformediftherewerenocalls
receivedforatleastAutoupgradeRX/TXdelayseconds(thissettingisonlyavailableifAdvancedmodeis
enabled).
DoNOTunplugtheopenSPOT2duringthefirmwareupgrade!
SharkRFNetwork
YoucanlogyourdeviceintotheSharkRFNetwork.Currentlyonlydevelopersandalphatestershaveaccessto
thenetwork'sfeatures.Eventually,thesefeatureswillbeavailableforallopenSPOT2users.
Voiceannouncements
TheopenSPOT2hasanown,built-invoiceannouncementsystem.Someannouncementsareplayedlocallyfrom
theopenSPOT2'sbuilt-inflashmemory,butsomeareplayedusingouropensourcevoiceannouncementserver.
Modemmodenotes:
DMR:voiceannouncementsaresenttoTG9,sotohearthem,makesureyouhaveTG9inyourradio'sRX
Settingspage
48

Related product manuals