SharkRF openSPOT2 - SharkRF IP Connector Server Connector

SharkRFIPConnectorServerconnector
YoucanusethisconnectortoacceptconnectionsfromanotheropenSPOTandopenSPOT2devices.This
connectoronlysupports1activeconnection,soifyouwanttolinkmorethan1device,youcanuseouropen
sourceSharkRFIPConnectorProtocolServer.Theprotocol'sdocumentationcanbefoundonGitHub,soyoucan
alsodevelopyourownapplicationfortheopenSPOT2.
TheeasiestwayistousetheQuicksetuptosetupthisconnector.
MakesurethattheUDPportusedbythisconnector(bydefaultit's65100)iscorrectlysetuponyourrouter(it's
openonthefirewallandisforwardedtotheopenSPOT2'sIPaddress).
Allmodemmodesaresupportedbythisconnector,withautomaticcrossmodeconversionbetweenthefollowing
modes:
DMR,C4FM(DNmode)andNXDN.
C4FM(VWmode)andP25.
SharkRFIPConnectorServer
89