SharkRF openSPOT2 - Active IP Address Query; D-STAR Unlink Command

ActiveIPaddressquery
TheactiveIPaddresscanbequeriedbycallingthefollowingIDs/callsigns:
DMR,NXDNandP25:ID9997.Bothprivateandgroupcallsareinterpreted.
D-STAR:callissentto .......A(7spacesandanA,replacedotswithspaces),orDTMFcodeBisentered.
C4FM:Specialcommand/crossmodeprivatecallDTMFcodeisenteredfollowedbyDTMFcodeB.
TheIPaddresswillbeannouncedbyvoice.TheDMR/NXDN/P25IPaddressqueryIDcanbechangedonthe
Settingspage,Voiceannouncementssection.
D-STARunlinkcommand
TheopenSPOT2isdesignedtobealwaysconnected,however,theunlink(U)commandissupportedand
activatestheNullconnector(which-asit'snamesays-doesnotconnectanywhere).
Youcanunlinkifacallissentto .......U(7spacesandaU,replacedotswithspaces),orDTMFcode#is
entered.
Controlcalls
93