SharkRF openSPOT2 - DMR SMS Chat

ThisfeatureisavailablewhenthemodemisinDMRmode,orthecurrentlyactiveconnectorsupportsDMRSMS
sending.
Sentmessagesaredisplayedontheright,receivedmessagesaredisplayedontheleftofthechatbox.Youcan
clickoneachmessageforadditionalinformation.
ThemodemradiobuttonisdisabledifthemodemisnotinDMRmode.MessagessenttoopenSPOT2'sDMRecho
ID(it's9999bydefault)willbeechoedbacktothesender.NotethattheopenSPOT2onlystoresthelast
receivedmessage,soyouhavetokeepopenthispageinyourbrowsertoreceivemorethanonemessageat
once.
UseETSIformatifyouwanttosendamessagetoHyteraradios,UDPformatforMotorolaradios,and
UDP/ChineseformatforotherChineseradios(Tyt,Retevis,etc.).
IfyouwanttoreceivemessagesfromthenetworkontheDMRSMSpage,youhavetochecktheHandle
messagesto/fromsourceIDcheckbox.Ifit'senabled,receivedSMSmessagestothegivenSourceIDwon'tbe
forwardedtoyourradio.
IfyouwanttosendreceivedDMRSMSmessagesasPOCSAGmessages,checktheHandlemessagesto/from
sourceIDcheckbox,andsetaPOCSAGRICtosendmessagesto.
Sidepanels/Toolspage
64