D-STAR® APRS®
You can set up the openSPOT4 to forward your D-STAR® transceiver's location
information to the APRS® network, so it will be visible on APRS® maps like
aprs.fi
Setting up the APRS® connection
First you have to set up the APRS® special connector using the openSPOT4's
Quick Setup.
Make sure you check the Enable in background checkbox. You don't need to
check the Allow uploading device location checkbox for D-STAR® location
forwarding.
You can verify the APRS® connection status on the Status page.
Setting up your D-STAR® transceiver
To Next Page
Loading...
