Homebrew/MMDVM® connector
You can use this connector to connect to a network which supports the
Homebrew or the MMDVM® protocol, like BrandMeister, TGIF, DMRplus,
Phoenix, DMR-MARC, XLX etc.
The easiest way is to use the Quick setup to connect to these networks.
This connector supports 2 protocols: Homebrew and MMDVM®. Use the
Homebrew protocol to connect to BrandMeister network servers, and the
MMDVM® protocol to connect to TGIF, DMRplus, Phoenix, DMR-MARC, XLX etc.
servers.
The default server password for BrandMeister servers is
passw0rd
or
password
,
but some servers do not use these defaults. In this case take a look at the
BrandMeister wiki, or ask the server's admin for the password if the openSPOT4
won't connect with the default one.
If you can't connect to a BrandMeister server because the authentication has
failed, then turn off Hotspot Security on your BrandMeister SelfCare page, or
use the hotspot password you've set there as the server password.
If you are using a BrandMeister server in Homebrew protocol mode, you can see
the list of currently linked static, dynamic talkgroups and reflectors on the
openSPOT4's Status page.
Cross mode usage
The Homebrew/MMDVM® connector is a DMR connector, but it supports C4FM
and NXDN® cross modes, and also D-STAR® with the openSPOT4 Pro.
To Next Page
Loading...
